| BODY: |
| |
• |
Extruded aluminum
sub frame allows for complete lift off body for future body
updates |
| |
• |
Rear wheel housing
constructed of aluminum |
| |
• |
Bright trim skirt
installed around fender opening |
| |
|
|
| COMPARTMENTATION: |
| |
• |
Three aluminum side
compartments located on the left and right side of the apparatus |
| |
LEFT SIDE: |
| |
|
• One 27"W
x 34"H x transverse deep located ahead of the rear wheelsCurved
1-1/2" pipe provides a safety guide |
| |
|
• One 39"W
x 16"H x 20"D located over the rear wheels |
| |
|
• One 27"W
x 34"H x 20"D located behind the rear wheels |
| |
RIGHT SIDE: |
| |
|
• One 27"W
x 34"H x transverse deep located ahead of the rear wheels |
| |
|
• One 39"Wx
16"H x 20"D located over the rear wheels |
| |
|
• One 27"
wide x 34" high x 20" deep located behind the rear
wheels |
| |
• |
Rear compartment
78"D, door opening of 34"W x 25"H |
| |
• |
Standard sweep out
design floor to facilitate easy cleaning |
| |
• |
All compartment
tops are manufactured of .125" aluminum treadplate |
| |
|
|
| COMPARTMENT CONSTRUCTION: |
| |
• |
All doors include
and satin finish and lock |
| |
• |
Bumper system installed
at the rear of the apparatus |
| |
• |
Box/Lap style locking
doors are available upon request |
| |
• |
Two aluminum 24"
deep adjustable shelves (L3, R3) with 2" lip on front and
rear of shelf |
| |
• |
Two roll out trays
in L1 and R1 manufactured of 3/16" (.1875") aluminum,
600lbs
capacity, locks secure tray in the stowed and extended position |
| |
• |
Each
compartment shelf and roll out tray is lined with our highly
durable polyurethane based Poly-Shield® compound that contours
to the application material: resistant to scratches, gouges,
mildew, rust, corrosion, and also provides a cushion barrier
for the equipment being stored |
| |
• |
Full depth roll
out tray, manufactured of 3/16" (.1875") smooth aluminum,
installed in the rear compartment |
| |
|
• Tray capacity
is 1000 pounds of distributed load |
| |
|
• Capable
of 100% extension |
| |
|
• Locks secure
the tray in the stowed and extended position |
| |
|
• Adaptable
for multiple functions: light rescue equipment, roll gun and
weapons rack |
| |
|
|
| ELECTRICAL: |
| |
• |
Twelve volt apparatus
wiring is completely independent of the chassis electrical system |
| |
• |
Whelen® TA4437A
split traffic advisor (arrow stik) shall be mounted on the upper
areas of the rear compartments |
| |
• |
Whelen® TACTRL1A
control head |
| |
• |
Whelen® C400800E
Centurion® lightbar with CDALY alley lights mounted on the
cab roof |
| |
• |
Whelen® model
52 LED warning lights with flange mounted on the front of the
vehicle |
| |
• |
Whelen® 97 LED
warning lights with flange mounted on the upper rear area of
the vehicle |
| |
• |
Whelen® 295HFSA6
single siren unit with nine switch light controls, features
noise
canceling microphone |
| |
• |
Federal® 100-watt
siren speaker shall be installed |
| |
• |
Whelen® 810ACRR
lights with flanges serve as rear driving signals |
| |
• |
Triple incandescent
brake-tail/turn/backup light installed on each side of the unit
at the rear |
| |
• |
ICC clearance lights
|
| |
• |
One five inch 12-volt
light installed in each apparatus compartment, automatic ON/OFF
feature activated by opening and closing compartment doors |
| |
• |
Two Whelen®
9E series scene lights with flange mounted at the rear, cab
console controlled |
| |
• |
120v shoreline connection
plug located in the left wheel well (mating drop cord
connector supplied) |
| |
|
|
| FINISH: |
| |
• |
Finished with a
highly durable paint compound with excellent gloss and color
retention properties |
| |
• |
Interior of the
compartments have a durable and protective spatter finish |
| |
• |
Striped with 6 inch
reflective Scotchlite® striping |
| |
• |
Black finish stripe
in the same design under the red stripe |
Download the Brochure
|
